A low alloy nickel, chromium, molybdenum case hardening steel / Výrobce ocelových kulatých tyčí a ocelových trubek z Taiwanu | JFS Steel

Ju Feng provides SNCM220, GB 20CrNiMo, JIS SNCM220, ASTM 8615, 8617, 8620, 8622, DIN 20MoCr4. / Profesionální dodavatel oceli a služební integrace.

Vyhledávání podle podmínek(Vyberte jednu z položek pro hledání):
   pokročilé vyhledávání

Best Sale

SNCM220| Více než 47 let ocelových CNC soustružnických a frézovacích služeb | JFS Steel

Od roku 2006 sídlící na Tchaj-wanu, Ju Feng Special Steel Co., Ltd. se specializuje na výrobu kovových tyčí a ocelových trubek.Mezi jejich hlavní ocelové výrobky patří SNCM220, ocelové tyče, ocelové plechy a ocelové trubky, stejně jako CNC řezání, vrtání, obrábění a tepelné zpracování oceli.

Ju Feng Special Steel Co., Ltd. (JFS) byla původně založena před 47 lety jako stavební společnost a od roku 2006 se JFS úspěšně rozšířila do odvětví speciálních ocelí, stala se předním dodavatelem v Tchaj-wanu různých druhů speciálních ocelových tyčí, ocelových plechů a ocelových trubek jako velkoobchodník nebo maloobchodník. V posledních letech Ju Feng může poskytovat nejen služby řezání materiálu, ale také CNC obrábění (kompletní obráběcí proces od surového materiálu po polotovar nebo hotový výrobek) pro naše zákazníky po celém světě. S více než 47 lety úspěšného rozšiřování do odvětví speciálních ocelí, které jsou předním dodavatelem speciálních ocelových materiálů na Tchaj-wanu.

JFS Steel nabízí zákazníkům nerezové tyče a trubky a služby přesného obrábění oceli od roku 2006. S pokročilou technologií a 47 lety zkušeností JFS Steel zajistí splnění požadavků každého zákazníka.


SNCM220

Alloy Steel

Equivalent Grades: GB 20CrNiMo, JIS SNCM220, ASTM 8615, 8617, 8620, 8622, DIN 20MoCr4. SNCM220 is mainly used for automobile bearings, drive shafts, gears, screws, cutting tools and other products which need impact resistance and wear resistant.
SNCM220 is a common type of alloy carburizing steel or bearing steel with the surface of high hardness, abrasion resistance and contact fatigue strength. Its core which has high toughness can withstand high impaction.

A low alloy nickel, chromium, molybdenum case hardening steel

Purpose

SNCM220 are widely used in high toughness alloy structural steel.

International Comparison of Materials

EU
EN
INTER  ISOUSA 
AISI
JAPAN
JIS
GERMANY
DIN
CHINA
GB
FRANCE
AFNOR
ITALY
UNI
-- -- 8620 SNCM220 20NiCrMo2-2 20CrNiMo 20NCD2 20NiCrMo2

SPAIN
UNE
Sweden
SS
Finland
SFS
Poland
PN
Czechia
CSN
Austria
ONORM
Russia
GOST
England
BS
-- 2560 -- -- -- -- 20ChGNM

1.6523

**This comparison table is for reference only. The standards and grades of various countries have slightly different chemical compositions. Please refer to the database for details.**

Chemical Composition(JIS G4051)

C(%)Si(%)Mn(%)P(%)S(%)Ni(%)Cr(%)Mo(%)Cu(%)
0.17-0.23 0.15-0.35 0.6-0.9 0≦0.03 0≦0.03 0.4-0.7 0.40-0.65 0.15-0.30 0≦0.3

Conditions of heat treatment

  • Annealing: 850℃ Furnace Cooling
  • Normalization: 850~900℃ Air Cooling
  • Hardening: 850~880℃ 1ST Oil Cooling, 800~850℃ 2RD Oil Cooling
  • Tempering: 150~200℃ Air Cooling
  • Hardening: 860~900℃ 1ST Oil Cooling, 780~820℃ 2RD Oil Cooling
  • Tempering: 150~200℃ Air Cooling

Criterion for heat treating conditions revise:

  • Ac: 730~830℃
  • Ar: 770~660℃
  • Ms: 400℃

Mechanical properties

Tensile strength (kgf/mm²): ≧85
Elongation (%): ≧17
Cross section reduction rate (%): ≧40
Impact value (J/cm2): ≧6
Hardness (Hb) : 248~341

Size Range

ShapeSize(mm)
Round Bar 13, 16, 17, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100, 105, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200, 210, 220, 230, 240, 250.
Steel Application
  • Gear - Ju Feng offers the steel material that can be used for gears.
    Gear

    There are many types of gears, such as: spur gears, sprocket gears, timing pulleys, helical gears, internal gears, racks, spur bevel gears, curved bevel gears, zero-degree bevel gears, staggered spiral gears, worm gears, Halberd gear. The material of the gear must have strong bending fatigue strength and contact fatigue strength, and the tooth surface must have sufficient hardness and wear resistance, and the core must have a certain strength and toughness. The materials for gear application that we recommend are as below.


  • Machine Tool Spindle - Ju Feng offers the steel material that can be used for machine tool spindle.
    Machine Tool Spindle

    There may be several spindles in a machine. There are many types of spindles, including grinding spindles, electric spindles, low-speed spindles, high-speed spindles, engraving machine spindles, milling machine spindles, lathe spindles, etc. Therefore, the spindle should be made of materials with the highest stability, rigidity and efficiency. The materials for machine tool spindle application that we recommend are as below.


  • Drive Shafts - Ju Feng offers the steel material that can be used for drive shaft.
    Drive Shafts

    In order to allow changes in the alignment and distance between the driving and driven components, the drive shaft contains one or more universal joints and couplings. Therefore, their materials must withstand strong pressure, while avoiding excessive additional weight to increase reverse inertia. The materials of drive shaft we recommend are as below. The materials for drive shaft application that we recommend are as below.


  • Bearing Shaft - Ju Feng offers the steel material that can be used for bearing shaft.
    Bearing Shaft

    There must be a shaft in the motor, which is mainly used to drive the motor and generate kinetic energy for other devices. The materials for bearing shaft application that we recommend are as below.


  • Cutting Tools - Ju Feng offers the steel material that can be used for cutting tools.
    Cutting Tools

    There are many types of cutting tools, such as: milling cutters, drills, circular saw blades, reamers, PCD (Polycrystalline Diamond) cutting tools, hole drills, lathe tools, stamping tools, etc. The quality of the cutting tool material will affect the surface quality, cutting efficiency, tool life and other factors. Therefore, the selected tool material should have a high degree of hardness, wear resistance, strength, toughness and heat resistance. The materials for cutting tools application that we recommend are as below.


  • Worm Shafts - Ju Feng offers the steel material that can be used for worm shaft.
    Worm Shafts

    When the worm wheel is running, it will generate a lot of heat energy due to contact friction. When the contact surface pressure is too high, coupled with high temperature, it is easy to cause wear on the tooth surface. Therefore, the worm rod should be made of wear-resistant and rigid materials. The materials for worm shaft application that we recommend are as below.


  • Machine Parts - Ju Feng offers the steel material that can be used for machining parts.
    Machine Parts

    The material types of mechanical parts include metallic materials, non-metallic materials and composite materials. Metal materials are divided into ferrous metal materials and non-ferrous metal materials. Ferrous metal materials include steel, cast steels and cast irons, which have good mechanical properties (such as strength, ductility, toughness, etc.), and are relatively cheap and easy to obtain. Non-ferrous metal materials have the advantages of low density, good thermal and electrical conductivity. The materials for machining parts application that we recommend are as below.