5-Axis Machining
Simultaneous 5-Axis and Mill-Turn Machining Services
JFS Steel provides simultaneous 5-axis milling and 5-axis mill-turn machining for steel parts, from alloy steel to tool steel. We handle the whole job in one place: drawing material from our steel stock, cutting to length, 5-axis machining, heat treatment, grinding and inspection.
One setup: turning, milling, drilling and tapping on a single machine.
Machining range up to Ø630 × 1,519 mm (24.8 × 59.8 in.): each part is assigned to the machine that fits it.
Steel in stock: medium carbon, alloy and tool steels supplied from our inventory, with mill certificates for full material traceability.
Advantages
- Fewer setups
Multiple faces are finished in one clamping, which makes hole positions and concentricity easier to hold. - Better tool access
Tilting the tool or part lets shorter cutters reach deep features, reducing chatter. - Less fixturing
Multi-face parts do not need a separate fixture for every face. - Combined operations
Turning, milling, drilling and tapping on one machine cut the waiting time between machines.
Parts Suited to 5-Axis Machining
| Part Type | Typical Features | Process |
| Shafts with angled or cross holes | Holes at different angles, keyways, flats | 5-axis mill-turn |
| Eccentric shafts and camshafts | Eccentric diameters, non-round profiles | 5-axis mill-turn |
| Flanges and fittings | Hole patterns on faces, angled faces, side holes | 5-axis mill-turn |
| Impellers and turbine-type parts | Continuous surfaces, twisted blades | Simultaneous 5-axis |
| Mold components and fixtures | Multi-face work, deep slots, chamfered faces | Simultaneous 5-axis |
| Robot and reducer components | Multi-face hole patterns, tight position tolerances | Simultaneous 5-axis / mill-turn |
Not sure which process your part needs? Send us the drawing and our engineers will review it.
Simultaneous 5-Axis vs. 3+2 Positional Machining
A 5-axis machine adds two rotary axes to the X, Y and Z linear axes, so the tool can approach the part from different angles. There are two ways to use them, depending on whether the rotary axes move during cutting:
| Method | How It Works | Typical Parts | JFS Equipment |
| 3+2 positional | The rotary axes index to a set angle and lock, then the machine cuts with three axes | Multi-face hole patterns, angled faces, angled holes | Mazak INTEGREX 5-axis mill-turn centers |
| Simultaneous 5-axis | All five axes move together while cutting, so the tool follows the surface continuously | Blades, complex surfaces, continuously changing angles | Mazak VARIAXIS i-700T |
Machining Capabilities
| Item | JFS Capability |
| Max. part size | Ø630 × 1,519 mm (24.8 × 59.8 in.) |
| Bar capacity | Up to Ø102 mm (4.0 in.) |
| Min. part size | 20 mm (0.79 in.) and above |
| Min. wall thickness | 5 mm (0.20 in.) and above |
| General dimensional tolerance | JIS B 0405 class f |
| General geometrical tolerance | JIS B 0419 class K |
| Tightest tolerance | Turning 0.02 mm (0.0008 in.) / Milling 0.01 mm (0.0004 in.) / Grinding 0.002 mm (0.00008 in.) |
| Roundness | 0.005 mm (0.0002 in.) |
| Surface roughness Ra | Turning 1.6 µm (63 µin.) / Milling 1.6 µm (63 µin.) / Grinding 0.8 µm (32 µin.) |
Achievable size and tolerance depend on part geometry, material, fixturing and tooling, and are confirmed for each drawing. For how to read these values, see What Is Precision Machining? Tolerances, Processes, and 5-Axis CNC Explained.
5-Axis Machine Specifications
| Item | Mazak VARIAXIS i-700T | Mazak INTEGREX j-200S NEO |
| Type | Simultaneous 5-axis machining center with turning | 5-axis mill-turn center, twin spindle |
| Max. workpiece size | Ø850 × 500 mm (33.5 × 19.7 in.) | Ø500 × 910 mm (19.7 × 35.8 in.) |
| Table | Ø630 mm (24.8 in.), max. load 700 kg (1,543 lb) | — |
| Rotary axes | A-axis −120° to +30°, C-axis rotation | B-axis indexing in 1° steps |
| Spindle speed | 18,000 rpm | Main spindle 5,000 rpm / milling spindle 12,000 rpm |
Machine specifications are taken from Mazak's official product pages. See Mazak Machining Equipment for our other machines.
Materials
| Category | Common Grades |
| Low, medium and high carbon steel | S45C (AISI 1045 equivalent) and others |
| Alloy steel | SCM440, SNCM220 |
| Tool steel | SKD11 |
| Bearing steel | SUJ2 |
| Free-cutting steel | — |
| Stainless steel, aluminum, copper | Available |
From Steel to Finished Part
- Material selection and supply: we recommend a grade for the application and draw it from stock
- Cutting to length: CNC circular saws and band saws
- Drilling: standard and deep-hole drilling
- 5-axis machining: simultaneous 5-axis or mill-turn, depending on part geometry
- Heat treatment and grinding: quench and temper, induction hardening, carburizing, nitriding and grinding arranged through qualified partners
- Inspection: dimensions, hardness, CMM measurement and roundness
- Rust-preventive packing and shipment
Material, machining and inspection are coordinated by one supplier, so you do not need to manage a steel distributor, a machine shop and a heat treater separately.
Inspection and Documentation
- Measuring equipment: COORD3 ARES 07.07.05 CMM, KEYENCE VL-800 3D scanning system, JMT 5040 automatic CNC vision measuring machine, hardness testers
- Calibration: instruments are calibrated annually by their manufacturers
- First-piece inspection: first-piece and dimensional inspection records are available; AS9102 FAI or other specified formats must be requested and confirmed at quotation
- Material certificates: available; EN 10204 3.1 depends on grade and order
- Inspection reports: provided on request
Prototyping
- Send drawings: 3D model and 2D drawing
- Review and quotation: machinability, process route and lead time, with a reply within 3 business days
- Material: drawn from JFS stock with mill certificates for traceability; customer-supplied material is also accepted
- Prototype machining: about 7 business days for typical parts
- Full dimensional inspection
- Sample delivery with inspection report
- Move to low-volume production after approval
Industries
- Robotics and automation: reducer shafts, planet carriers, drive shafts
- Machine tools: spindles, gears, worm shafts
- Electric motors: motor shafts, flanges
- Semiconductor equipment: fixtures, shafts
What to Include in Your RFQ
- 3D model (STEP, IGES) and 2D drawing (PDF)
- Material and hardness requirements
- Quantity (prototype or production)
- Heat treatment and surface finishing requirements
- Critical dimensions and tolerances
- Required delivery date
- Email: info.jufeng@gmail.com
- Phone: +886-4-2523-3499
- Send your drawings for review and quotation
FAQ
What is the difference between 3-axis, 4-axis and 5-axis machining?
A 3-axis machine moves only in X, Y and Z, so each new face needs a new setup. A 4-axis machine adds one rotary axis to turn the part for side features. A 5-axis machine adds a second rotary axis, letting the tool reach the part from more angles, which suits angled holes, multi-face parts and contoured surfaces.
Which parts need simultaneous 5-axis machining?
Parts with continuously changing surfaces, such as impellers, blades and mold cavities. Parts that only need machining at a few fixed angles can usually be done with 3+2 positional machining.
Is 5-axis machining more expensive?
The hourly rate of a 5-axis machine is usually higher. For multi-face parts, fewer setups and fixtures can offset that, so the total cost is not necessarily higher. Simple parts are often more economical on a 3-axis machine, and we will recommend the right process based on your drawing.
Can you make a single prototype?
Yes. Quantities follow your requirements, and single-piece prototypes are accepted.
Can I supply my own material?
Yes. As a special steel supplier, though, JFS Steel can handle the whole job from steel, cutting and machining to heat treatment and inspection, with mill certificates for material traceability. Sourcing material through us saves the time of finding and shipping stock, and one supplier is responsible for both material and machining quality.
What information do you need for a quotation?
See "What to Include in Your RFQ" above.


